
How Venn develops its rims and hubs
November 9, 2026Plenty of very good bikes have rim brakes, and their owners should not have to change bikes to ride modern carbon wheels. On those bikes the rim has two jobs: it is the wheel, and it is the brake.
Heat is the test
Every time you brake, speed turns into heat in the brake track. On a long descent that heat builds up. The carbon fibre is not the weak point. The resin that holds the fibres together is: every resin has a glass transition temperature, or Tg, and above it the resin softens.
So a carbon rim for rim brakes needs a brake track made for that heat. Our rim brake rims have a brake track in high-Tg resin, Tg 250 °C.
Good habits help any rim:
- Brake firmly, then let go. Long, steady dragging gives the rim no time to cool.
- Share the work between front and rear on long descents.
- Use pads made for carbon, and keep them for carbon. Pads that have been used on aluminium rims can carry metal particles that score a carbon track.
- Bed new pads in before your first long descent.
What a 3D brake track does
All four of our rim brake rims have a 3D brake track: a textured surface that helps the pad grip on a wet road. Brake pads come in the box with each of these wheelsets. When you replace them, use carbon-specific pads such as our Venn Red.
The four wheelsets
| Wheelset | Depth | Rim weight | Weight a pair (calculated from its parts) | Made for |
|---|---|---|---|---|
| Venn 360 S TCC | 36 mm | 400 g | 1350 g | climbing and all-round riding |
| Venn 470 S TCC | 47 mm | 460 g | 1460 g | fast on the flat, stable in crosswinds |
| Venn 590 S TCC | 59 mm | 500 g | 1540 g | fast group rides and racing on rolling roads |
| Venn 780 S TCC | 78 mm | 570 g | 1680 g | time trials, triathlon and flat, fast courses |
Looking for a 50 mm rim brake wheelset? The 470 and the 590 sit either side of it.
What all four share
| Rim width | 21 mm inside, 28 mm at the widest point |
| Recommended tire width | 25 to 28 mm, tubeless or clincher on a hooked bead |
| Spokes | 20 front, 24 rear, Pillar 1423 bladed steel |
| Hubs | Venn RESR-01, 36-tooth ratchet |
| Axle type | Quick release |
| Freehub | Shimano 11-speed |
Any shop can true the wheel or replace a steel spoke, and one spare of each length comes in the box.
Every Venn wheel is hand-built, tensioned and trued by hand from zero tension and measured with a digital tension meter. Every rim is made to the ETRTO standard and passes our 100 J impact test, where the UCI’s wheel test requires 40 J. These wheels are engineered by the team that made the first filament wound bicycle rims (Eurobike Award 2015).




